ELECTRICAL SPECIFICATIONS:
INPUT VOLTAGE:
90 VAC TO 264 VAC
INPUT CURRENT:
< 0.7A RMS AT 90 VAC INPUT
INPUT FREQUENCY:
47 HZ - 63 HZ
OUTPUT CURRENT:
SEE OUTPUT RATING BELOW, NO MINIMUM LOAD
REQUIRED
OUTPUT POWER (RATED):
20 WATTS MAX
OUTPUT RIPPLE VOLTAGE (PEAK TO PEAK):
+/-1% OR 50 mV WHICHEVER IS GREATER AT NOMINAL
OUTPUT VOLTAGE. MEASURED AT 20 MHz BANDWIDTH
WITH 0.1µf CERAMIC CAPACITOR IN PARALLEL WITH 10 µf
ELECTROLYTIC CAPACITOR CONNECTED AT THE END OF
THE OUTPUT CONNECTOR.
OUTPUT REGULATION (LINE/LOAD):
+ 5 % FOR MAIN OUTPUT, MEASURED AT O/P CONNECTOR
LINE REGULATION:
+ 2 % MAX AT FULL LOAD
TURN ON/ TURN OFF OVERSHOOT:
± 5% MAX 500uS MAX RECOVERY TIME FOR 25%
STEP LOAD
TURN-ON DELAY:
1 SEC TYPICAL
HOLD-UP TIME:
5 mSEC MIN AT NOMINAL INPUT AND FULL LOAD
EFFICIENCY AVERAGE:
76 % TYPICAL AT NOMINAL LINE
NO LOAD POWER CONSUMPTION:
COMPLIES WITH ENERGY STAR TIER 2 (NORTH AMERICA)
OUTPUT INDICATOR:
GREEN LED FOR OUTPUT PRESENT(ONLY FOR 9.5V TO 14.0
DC MODELS)
SWITCHING FREQUENCY:
65 KHZ TYPICAL
OVER-VOLTAGE PROTECTION:
PROTECTED, UNIT WILL AUTO-RECOVER UPON REMOVAL
OF FAULT
OVER-CURRENT/SHORT CIRCUIT:
PROTECTED, UNIT WILL AUTO-RECOVER UPON REMOVAL
OF FAULT
OTHER PROTECTION:
INPUT FUSING
SAFETY APPROVALS:
UL60950-1:2003, 1-st ED., CUL TO 22.2 # 60950-1:2003,1-st
ED., CE CLASS II
DIELECTRIC WITHSTAND VOLTAGE:
4242VDC PRIMARY-SECONDARY; 2121 VDC PRIMARYGROUND
LEAKAGE CURRENT:
< 0.25 mAAT NOMINAL AC INPUT VOLTAGE AND FREQUENCY
EMI:
COMPLIES WITH EN55022, CLASS B AND FCC PART 15
CLASS B WHEN TESTED WITH A RESISTIVE LOAD, BOTH
CONDUCTED AND RADIATED
CE MARK:
TESTED TO COMPLY WITH EN61000-3-2 EN61000-3-3, AND
EN50082-1, INCLUDING EN61000-4-2, EN61000-4-3,
EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-11
MTBF:
200,000 HOURS AT 25°C AMBIENT TEMPERATURE
OPERATING TEMPERATURE:
0°C TO 40° C
STORAGE TEMPERATURE:
20°C TO 85° C
HUMIDITY:
0% TO 90% RELATIVE HUMIDITY, OPERATING
ROHS:
COMPLIES WITH EU 2002/95/EC AND CHINA SJ/T 11363-2006
NOTES:
1. -: ITE MODEL
2. EACH OUTPUT CURRENT AND POWER CAN VARY WITHIN
ITS DESIGNATION RANGE AS LONG AS THE MAXIMUM
CURRENT AND OUTPUT POWER ARE NOT EXCEEDED.
3. SINGLE OUTPUT UNITS ARE AVAILABLE FROM 3V
THROUGH 14V AND 18V THROUGH 24V IN 0.1V INCREMENTS
4. –X.X: OPTIONAL FOR SPECIFYING OUTPUT VOLTAGE
DEVIATION FROM STANDARD MODEL (EXAMPLE: 12 VDC
MODEL = GT-81041-2014-2.0-W2).
5. –W2: STANDARD US WALL PLUG-IN MODEL WITH NEMA
1-15P BLADE CONFIGURATION.
6. L: OPTIONAL LED (AVAILABLE ONLY FOR 9.5 TO 14.0 V
US MODELS)